Hot-Rolled (Pickled and Oiled) - POOxide scale layer on the hot-rolled flat steel surface is cleaned by hydrochloric acid. This process is called pickling, and the process of oiling of surface for prevention of corrosion is termed as oiling. And hot-rolled flat steel product pickled and oiled as above is named as “Pickled and Oiled Hot-Rolled Steel”.
- Thickness 1,20 - 6,00 mm
- Width 600 - 1.560 mm
- QualitySteel For Stamping and Cold Forming (DD11, DD12, DD13, DD14) High Strength Steel For Cold Forming (S315MC, S355MC, S420MC, S460MC, S500MC, S550MC, S700MC) Structural Steel (S185JR, S235JR, S275JR, S355JR)
- Product Type Coil
Cold Rolled Flat Steel - CRThey are flat steels manufactured by cold rolling of pickled and oiled hot-rolled flat steels. “Cold-Rolled Steel” is obtained by application of surface cleaning, recrystallization annealing, surface roughening and tempering operations following completion of the rolling process.
By our different qualities and grades obtained thanks to cold-rolling, annealing and tempering operations, we are able to meet special demands of end users as well.
- Capacity 600.000 tons/year
- Thickness 0,25 - 3,00 mm
- Width 600 - 1.530 mm
- QualityCold Forming Steel (DC01, DC03, DC04, DC05, DC06, DC04-C590) Enameling Steel (DC01EK, DC04EK) High Strength Low Alloy Steel (H260LA, H300LA, H340LA, H380LA, H420LA) High Yield Strength Steel (BOR240, BOR271, BOR460) High Carbon and Special Alloy Steel (51CrV4, C40, C45, C50, C55, C60, C67)
- Product Type Coil, Slitted-Coil, Sheet
Hot Dipped Galvanized Flat Steel - HDGThey are flat steels galvanized by continuous hot dip method.
Zinc / galvanized coating is applied on surface of flat steel materials in order to protect them against corrosion. Flat steel is heated and introduced into melt zinc pot, and is bound by establishing a chemical link onto zinc / galvanized coating surface. Galvanized coating provides steel products with corrosion resistance and cathodic protection.
- Capacity 900.000 tons/year
- Thickness 0,25 - 4,00 mm
- Width 400 - 1.550 mm
- Coating Thickness (Double Side) 50-600 gr/m2
- QualityDrawing Steel (DX51D+Z, DX52D+Z, DX53D+Z, DX54D+Z, DX56D+Z, DX57D+Z)
Dual Phase Steel (DP450, DP500, DP600, DP800)
High Strenght Low Alloy Steel (H260LAD, H300LAD, H340LAD, H380LAD, H420LAD)
Bake Hardening Steel (HX180BD, HX220BD, HX260BD, HX300BD)
Rephosphorized High Strength Steel (HX180YD, HX220YD, HX260YD, HX300YD)
Structural Galvanized Steel (S220 GD+Z, S250 GD+Z, S280 GD+Z,
S320 GD+Z, S350 GD+Z, S390 GD+Z, S420GD+Z, S450GD+Z, S550GD+Z, S550 GD) - Product Type Coil, Slitted-Coil, Sheet